Screw / Drill Driver TruTool DD 1010

Equipped with two gear ratios, the high-quality drill driver can achieve 15 or 30 newton meters in both the clockwise and counterclockwise directions. Maximum idle speed is 1,450 revolutions per minute. The drill driver is distinguished above all by its ergonomically correct design and superb operating convenience. TruTool DD 1010 - including the rechargeable battery - weighs only 1,1 kg and can be used for start hole drillings in steel and, in just the same way, to drive screws and drill holes in a variety of other materials.

DD1010_Startlochbohrung-Trapez-700-500 DD1010-700-456 DD1010_Anwendung-Kanal-700-500 DD1010_700-500

Technical Data

TruTool DD 1010

 

Gears

2 

Quick-release drill chuck

10 mm 

Max. drill performance (steel)

8 mm 

Max. drill performance (wood)

20 mm
20 mm 

Torque settings

17 + drilling 

Max. torque (soft / hard)

15 Nm / 30 Nm 

Idle speed (1st gear)

440 RPM 

Idle speed (2nd gear)

1450 RPM

Voltage / capacity

10.8 V 

Weight

1.1 kg (with 2 Ah battery)
1.3 kg (with 4 Ah battery) 

Powerful 10,8 V Li-Ion battery drill driver

  • 2-speed motor with quick-stop function
  • Extremely high operating comfort: balanced design and low weight
  • Softgrip for a secure handling and low vibration work
  • 17 torque and drill settings
  • Stable, anti-tilt stand
  • Integrated LED Light to illuminate working area
  • High-quality Li-Ion technology for a long run time per battery charge
  • Compatible: 10,8 V Li-Ion battery and charger are identical with the current 10,8 V Li-Ion TRUMPF battery machines

For start hole drillings:

  • Ventilation works and climate control technology (spiral seam tubes)
  • House-front construction
  • Construction / dry walling
  • Plumbers

For screws and drilling

  • all industries

TruTool DD 1010
Anzahl Gänge 2 
Schnellspann-Bohrfutter 10 mm 
Max. Bohrleistung Stahl 8 mm 
Max. Bohrleistung Holz 20 mm
20 mm 
Drehmomentstufen 17 + Bohren 
Drehmoment max. (weich / hart) 15 Nm / 30 Nm 
Leerlaufdrehzahl 1. Gang 440 1/min 
Leerlaufdrehtzahl 2. Gang 1450 1/min
Spannung / Kapazität 10.8 V 
Gewicht 1.1 kg (mit 2 Ah-Akku)
1.3 kg (mit 4 Ah-Akku) 
TruTool DD 1010
Anzahl Gänge 2 
Schnellspann-Bohrfutter 10 mm 
Max. Bohrleistung Stahl 8 mm 
Max. Bohrleistung Holz 20 mm
20 mm 
Drehmomentstufen 17 + Bohren 
Drehmoment max. (weich / hart) 15 Nm / 30 Nm 
Leerlaufdrehzahl 1. Gang 440 1/min 
Leerlaufdrehtzahl 2. Gang 1450 1/min
Spannung / Kapazität 10.8 V 
Gewicht 1.1 kg (mit 2 Ah-Akku)
1.3 kg (mit 4 Ah-Akku)