Slitting Shear TruTool C 160 (available as battery version)
Power-Head-Technology: The slitting shear is now also available as Li-Ion battery. Many details in the gear head are tailored to the voltage of the battery technology and enable the 10,8 volt battery to produce output that is comparable to a 14.4 volt battery.
TruTool C 160 without chip breaker provides you with an open view onto the workpiece, permitting precise cutting according to the plan. And that is true for curves as well. The cuts are free of distortion and the quality is high. There is no reworking. We offer you a great variety of blades that were developed for a variety of applications. They can be simply exchanged in seconds with a single move. With the optional parallel stop, you can cut strips from 35 to 300 mm precisely.
Technical Data
|
|
TruTool C 160 (230V) |
TruTool C 160 (Akku) |
|
Cutter (further cutters available) |
Cutter for 1 - 1,6 mm sheet thickness |
Cutter for 1 - 1,6 mm sheet thickness |
|
Max. material thickness |
|
|
|
1.6 mm |
1.6 mm |
|
1.2 mm |
1.2 mm |
|
2 mm |
2 mm |
|
Working speed |
6 m/min - 10 m/min |
5 m/min - 9 m/min |
|
Start hole diameter |
15 mm |
15 mm |
|
Smallest radius |
90 mm |
80 mm |
|
Rated input power |
350 W |
|
|
Strokes at nominal load |
3800 RPM |
2500 RPM |
|
Weight (electric: without cable; battery: with battery) |
1.4 kg |
1.9 kg |
|
Motor capacity |
|
10.8 V |
Accurate starting and cutting
- Light weight, ergonomic, handy
- Small start hole diameter
- Machine available as electric version as well Li-Ion-battery
Applications
- Ventilation works and climate control technology (Spiral-seam tubes)
- House-front construction
- Construction, including separation of C-L-U profiles
- Plumbers
- Coil-application